Silverado Classic 3500 2WD V8-6.0L (2007)
Notice: Refer to Fastener Notice.
4. Install the NEW discharge hose nut to the condenser.
Tighten the nut to 16 N.m (12 lb ft).
5. Install the upper radiator air baffle.
6. Install the discharge hose (5) to the compressor using new sealing washers.
7. Install the NEW discharge hose mounting bolt (2) to the A/C compressor.
Tighten the bolt to 16 N.m (12 lb ft).
8. Evacuate and recharge the A/C system. Refer to Refrigerant Recovery and Recharging. See: Service and Repair/Removal and
Replacement/Refrigerant Recovery and Recharging
9. Leak test the fittings of the component using the J 39400-A.
