chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Fuel Hose/Pipes Assembly Replacement (Pickup and Cab/Chassis)|Page 9869 > < Fuel Hose/Pipes Assembly Replacement (Pickup and Cab/Chassis)|Page 9867

Silverado Classic 3500 2WD V8-6.0L (2007)

Page 2
background image

system contamination.

1. Remove the fuel tank.
2. Disconnect and remove the fuel feed (1) line from the sending unit and retaining clips.
3. Cap the fuel feed/return, and evaporative emission (EVAP) lines in order to prevent possible fuel/EVAP system contamination.

INSTALLATION PROCEDURE

1. Remove the caps from the fuel feed/return, and EVAP lines.
2. Install and connect the fuel feed (1) line to the sending unit and retaining clips.
3. Install the fuel tank.

Fuel Hose/Pipes Replacement - Chassis (Cab/Chassis - Front)

FUEL HOSE/PIPES REPLACEMENT - CHASSIS (CAB/CHASSIS - FRONT)

REMOVAL PROCEDURE

IMPORTANT:  Clean the fuel and evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the lines in order
to avoid possible system contamination.

Fuel Hose/Pipes Assembly Replacement (Pickup and Cab/Chassis)|Page 9869 > < Fuel Hose/Pipes Assembly Replacement (Pickup and Cab/Chassis)|Page 9867