Silverado Classic 3500 2WD V8-6.0L (2007)
Fluid Line/Hose: Service and Repair
Allison - Automatic Transmission
Transmission Fluid Cooler Hose/Pipe Connector Replacement
Transmission Fluid Cooler Hose/Pipe Connector Replacement
Removal Procedure
1. Disconnect the hose from the transmission oil cooler pipe connector being replaced.
2. Remove the transmission oil cooler pipe connectors (1) and (2).
Installation Procedure
1. Notice:
Refer to Fastener Notice in Service Precautions.
Install new transmission oil cooler pipe connectors (1) and (2).
Tighten to 25 Nm (18 ft. lbs.).
2. Connect the hose to the transmission oil cooler pipe connectors.
Transmission Fluid Cooler Hose/Pipe Replacement
Transmission Fluid Cooler Hose/Pipe Replacement
Removal Procedure
1. Raise the vehicle. Refer to Vehicle Lifting.
2. Pull the plastic cap back from the quick connect fitting.
