Silverado Classic 3500 2WD V8-6.0L (2007)
10. Install the propeller shaft universal joint (2) to the pinion yoke (1). Align the reference marks made during removal.
11. Install the yoke retainers (7) and the yoke retainer bolts (6) to the pinion yoke (1).
Tighten the yoke retainer bolts to 25 Nm (18 ft. lbs.).
12. Inspect the axle lubricant level, and add, if necessary. Refer to Front Axle Lubricant Level Inspection.
13. Install the differential carrier assembly shield, if equipped. Refer to Shield Replacement.
14. Install the brake calipers. Refer to Front Brake Caliper Replacement (1500 Series) Front Brake Caliper Replacement (2500 Series).
15. Fill the drive axle. Refer to Front Axle Lubricant Replacement.
16. Install the tire and wheel assemblies.
17. Lower the vehicle.
