Silverado Classic 3500 2WD V8-8.1L (2007)
4. Install the oil pan bolts.
5. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the oil pan bolts.
1. Tighten the bolts a first pass in sequence to 10 Nm (89 inch lbs.).
2. Tighten the bolts a final pass in sequence to 25 Nm (18 ft. lbs.).
6. Position the battery cable channel into place.
7. Install the battery cable channel bolt.
Tighten the bolt to 9 Nm (80 inch lbs.).
8. Install the oil level sensor to the oil pan.
Tighten the sensor to 20 Nm (15 ft. lbs.).