Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
Tighten the retaining screws to 2 N.m (18 lb in).
10. Reposition the inboard seat track trim (1).
11. Connect the audio amplifier electrical connectors.
12. Connect the floor console electrical connector.
13. Install the center console end panel.
14. Install the console storage bin.
15. Install the cupholder to the console.
16. Install the upper console bezel.
17. Install the radio amp fuse. Refer to Electrical Center Identification Views.
18. If the amplifier has been replaced, perform the audio amplifier set up procedure for the BOSE(TM) amplifier with UQ7 and Y91. Refer to Audio
Amplifier Setup. See: Testing and Inspection/Programming and Relearning/Audio Amplifier Setup
19. Refer to Control Module References for programming and setup information. See: Testing and Inspection/Programming and Relearning