Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
10. Hold the lock tab in place.
11. Important: Pushing forward on the park brake cable will unlock the cable from the retainer allowing the cable to be removed from the park brake
lever.
Push the park brake cable forward.
12. Important: When removing the park brake cable from the lever, the park brake return spring will remain attached to the lever. DO NOT remove
the return spring from the lever. If the return spring becomes separated from the lever, replace the rear brake shoes. The lever is part of the brake
shoe assembly.
Remove the park brake cable from the lever.
Installation Procedure