Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
14. Close the harness clip (2).
15. Connect the fuel lines.
16. Install the fuel hose bracket nut.
Tighten the nut to 21 Nm (15 ft. lbs.).
17. Position the generator positive cable.
18. Install the generator positive cable in the clip on the engine front cover.
19. Install the generator positive cable and nut.
Tighten the nut to 9 Nm (80 inch lbs.).
20. Install the positive battery cable junction block bracket and bolt (1) to the power steering pump.
Tighten the bolt to 9 Nm (80 inch lbs.).
