Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
6. Install the PCV hose/pipe.
7. Position the fuel filter with bracket to the rocker cover.
8. Install the fuel filter bracket bolts.
Tighten the bolts to 21 Nm (15 ft. lbs.).
9. Position the heater outlet hose.
10. Install the heater hose bracket bolt to the bracket.
Tighten the bolt to 21 Nm (15 ft. lbs.).
11. Install the EGR cooler tube.
12. Install the bracket.
13. Install the oil level indicator tube bracket bolts.
Tighten the bolts to 21 Nm (15 ft. lbs.).
14. Install the oil level indicator tube bolt.
Tighten the bolt to 21 Nm (15 ft. lbs.).
15. Install the wiring harness retainer to the bracket.