chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Fuel Feed Pipe and Return Pipe Purging|Page 10575 > < Fuel Feed Pipe and Return Pipe Purging|Page 10573

Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)

Page 6
background image

NOTE:  Refer to Fastener Notice.

2. Install the fuel bundle nuts.

Tighten the nuts to 16 N.m (12 lb ft).

3. Connect the pressure balance pump electrical connector.
4. Install the front and auxiliary fuel tanks.

Fuel Hose/Pipes Replacement - Chassis (Cab/Chassis)

FUEL HOSE/PIPES REPLACEMENT - CHASSIS (CAB/CHASSIS)

REMOVAL PROCEDURE

1. Disconnect the fuel feed and return lines.
2. Remove the fuel line bracket nut.
3. Remove the fuel line bracket from the stud.
4. Raise and suitably support the vehicle. Refer to Vehicle Lifting.

Fuel Feed Pipe and Return Pipe Purging|Page 10575 > < Fuel Feed Pipe and Return Pipe Purging|Page 10573