Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
Notice: Refer to Fastener Notice.
2. Install the auxiliary generator bracket bolt.
Tighten the bolt to 50 N.m (37 lb ft).
3. Install the auxiliary generator (4).
4. Install the auxiliary generator bolts (3).
Tighten the bolt to 50 N.m (37 lb ft).
5. Install the positive cable to the auxiliary generator, perform the following:
1. Install the positive cable.
2. Install the positive cable nut (1).
Tighten the nut to 9 N.m (80 lb in).
3. Slide the boot (4) up to cover the terminal stud.
6. Install the drive belt.