Silverado Classic 3500 4WD V8-6.6L DSL Turbo (2007)
2. Install the positive cable nut (2).
Tighten the nut to 9 N.m (80 lb in).
3. Slide the boot (3) up to cover the terminal stud.
6. Connect the generator electrical connector (1).
7. Install the electrical harness clip bolts.
Tighten the bolts to 10 N.m (89 lb in).
8. Install the upper fan shroud.
9. Install the drive belt.
10. Install the air cleaner.
11. Connect the negative battery cable.