Silverado Classic SS V8-6.0L (2007)
Transmission Cooler: Service and Repair
4L60-E/4L65-E/4L70-E - Automatic Transmission
Transmission Fluid Auxiliary Cooler Replacement
Removal Procedure
1. Remove the front grill assembly. Refer to Grille Replacement (Chevrolet) Grille Replacement (GMC).
2. Place a drain pan under the vehicle.
3. Disconnect the transmission oil cooler lines from the auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting
Disconnection and Connection.
4. Remove the auxiliary oil cooler bolts (1) and push pins (2).
5. Remove the auxiliary oil cooler from the vehicle.
Installation Procedure
1. Install the auxiliary oil cooler to the vehicle.
2. Notice:
Refer to Fastener Notice.
Install the bolts (1) and the push pins (2) that retain the auxiliary oil cooler to the radiator brace.
Tighten the bolts to 12 Nm (9 ft. lbs.).
3. Connect the transmission oil cooler lines to the auxiliary cooler. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting
Disconnection and Connection.
4. Install the front grill assembly. Refer to Grille Replacement (Chevrolet) Grille Replacement (GMC).