Silverado Classic SS V8-6.0L (2007)
Constant Velocity Joint: Service and Repair
Wheel Drive Shaft Inner Joint and Seal Replacement
Wheel Drive Shaft Inner Joint and Seal Replacement
Tools Required
^
J 35910 Drive Axle Seal Clamp Pliers
^
J 36652-1 Drive Axle Clamp Swage Tool
^
J 36652-98 Axle Swage Tool
Removal Procedure
1. Remove the wheel drive shaft. Refer to Wheel Drive Shaft Replacement.
2. Remove the wheel drive shaft seal cover, if applicable. Refer to Wheel Drive Shaft Seal Cover Replacement.
3. Important:
Use caution when using the hand grinder by the tripot housing (1).
Use a hand grinder in order to cut through the swage ring (2).
4. Remove the tripot housing (1) from the halfshaft.
5. Wipe the grease off of the housing (1).
6. Thoroughly degrease the tripot housing (1).
7. Allow the tripot housing (1) to dry prior to assembly.