Silverado Classic SS V8-6.0L (2007)
Shift Boot: Service and Repair
NV 4500 - Manual Transmission
Control Lever and/or Boot Replacement
Removal Procedure
1. Important:
DO NOT move the shift lever assembly adjustment nut if replacing the control lever.
Remove the control lever.
2. Remove the control lever boot retainer plastic retainers, if necessary.
3. Remove the control lever boot retainer, if necessary.
4. Remove the control lever boot screws, if necessary.
5. Remove the control lever boot, if necessary.
6. Remove the control lever insulator, if necessary.
Installation Procedure
