Silverado SS AWD V8-6.0L VIN N (2003)
2. Install the fender to the rear pillar retaining bolts through the tail lamp opening.
3. Install the rear retaining bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the bolts to 17 N.m (12 lb ft).
4. Install the tail lamp assembly.
5. Install the screws in the wheelhouse attaching the fender to the box.
Tighten
Tighten the screws to 2 N.m (18 lb in).
6. Install the bolts to the front of the fender.
Tighten
Tighten the bolts to 17 N.m (12 lb ft).
