Silverado SS AWD V8-6.0L VIN N (2003)
Accessory Compartment: Service and Repair
Tool Storage Compartment Replacement (PRO)
TOOL STORAGE COMPARTMENT REPLACEMENT (PRO)
REMOVAL PROCEDURE
1. Raise the rear seat.
2. Remove the nuts that retain the tool storage compartment to the mounting brackets.
3. Remove the tool storage compartment from the vehicle.
INSTALLATION PROCEDURE
1. Install the tool storage compartment to the vehicle.
2. Install the nuts that retain the tool storage compartment to the vehicle.
3. Install the nuts that retain the tool storage compartment to the mounting brackets.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nuts to 10 N.m (88 lb in).
4. Lower the rear seat.
