Silverado SS AWD V8-6.0L VIN N (2003)
1. Install one of the hinge in the opening in the panel.
2. Swing the cupholder assembly so that the other hinge can be installed in the other opening.
3. Inspect for correct operation.
Switch Replacement - Hot and Cold Cupholder
SWITCH REPLACEMENT - HOT AND COLD CUPHOLDER
REMOVAL PROCEDURE
1. Remove the cupholder assembly.
2. Disconnect the wire connectors from the 2 switches.
-
Switch 1 is the power switch.
-
Switch 2 is the hot and cold switch.
IMPORTANT: Observe the orientation of the switches. The red lights points towards the rear of the vehicle.
