Silverado SS AWD V8-6.0L VIN N (2003)
Note: Refer to Fastener Notice in Cautions and Notices.
3. Install the new screws (1) in the EBCM (2).
-
Tighten the screws to 5 N.m (39 lb in) in an X-pattern.
4. connect the chassis electrical connectors to the EBCM.
5. Lower the vehicle.
6. Connect the negative battery cable.
7. Revise the tire calibration using the Scan Tool Tire Size Calibration function.
8. Return to Diagnostic Starting Point - Antilock Brake System.
