Silverado SS AWD V8-6.0L VIN N (2003)
Traction Control Switch: Service and Repair
Antilock Brake System
Repair Instructions
Traction Control Switch Replacement
Removal Procedure
1. Remove instrument panel (IP) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.
2. Gently lift the switch retaining tabs (1) and remove the traction control switch (2) from the instrument panel (IP) assembly (3).
3. Disconnect the harness connector from the traction control switch.
Installation Procedure
1. Connect the harness connector to the traction control switch.
2. Install the traction control switch (2) into the instrument panel (IP) assembly (3), making sure that all of the switch retaining tabs (1) are engaged.
3. Install instrument panel (IP) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gauges and Console.