Silverado SS AWD V8-6.0L VIN N (2003)
10. Lower the vehicle.
Right Rear - W/O NYS
Park Brake Cable Replacement - Right Rear (w/o NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
3. Release the park brake.
4. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
5. For all 15 series vehicles, relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and
removing the right park brake cable from the equalizer bar.
6. For 25/35 series vehicles, disable the park brake cable automatic adjuster. Refer to Disabling the Park Brake Cable Automatic Adjuster.
7. For 25/35 series vehicles, disconnect the cable at the equalizer.
8. Remove the bolt from the rear axle clip.
9. Remove the cable from the differential clip.
