Silverado SS AWD V8-6.0L VIN N (2003)
9. Remove the park brake shoe return spring (6).
10. Remove the park brake shoe anchor springs and pins.
11. Separate the tips of the shoes from the park brake actuator and remove the park brake shoes and adjuster assembly from the vehicle.
Installation Procedure
1. Clean the debris and the dust from the park brake components using a clean shop cloth.
2. Install the adjuster assembly to the park brake shoes.
3. Separate the tips of the shoes and install the park brake shoes to the park brake actuator.
4. Install the park brake shoe anchor springs and pins.
5. Install the park brake shoe return spring (6).
6. Adjust the park brake shoe. Refer to Park Brake Adjustment.
7. Install the rear axle shaft. Refer to Rear Axle Shaft Replacement (8.6 Inch, 9.5 Inch Axles) Rear Axle Shaft Replacement (9.75 Inch Axle) in Rear
Drive Axle.
8. Install the rotor. Refer to Brake Rotor Replacement - Rear (Except Dual Wheels or NYS) Brake Rotor Replacement - Rear (W/Dual Wheels)
Brake Rotor Replacement - Rear (W/NYS) in Disc Brakes.
