Silverado SS AWD V8-6.0L VIN N (2003)
2. Install the evaporator tube nut to the condenser.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
3. Install the grille to the vehicle.
4. Install the right park/turn signal lamp.
5. Install the evaporator tube to the evaporator.
6. Install the evaporator tube nut to the evaporator.
Tighten
Tighten the nut to 16 N.m (12 lb ft).
7. Evacuate and recharge the A/C system.
8. Leak test the fittings of the components using the J 39400-A.