Silverado SS AWD V8-6.0L VIN N (2003)
Hose/Line HVAC: Service and Repair
Evaporator Tube Replacement
TOOLS REQUIRED
J 39400-A Halogen Leak Detector
REMOVAL PROCEDURE
1. Recover the refrigerant from the A/C system.
2. Remove the evaporator tube nut from the evaporator.
3. Remove the evaporator tube from the evaporator.
4. Remove the right park/turn signal lamp.
5. Remove the grille from the vehicle.
6. Remove the evaporator tube nut from the condenser.
7. Remove the evaporator tube from the condenser.
8. Remove the evaporator tube from the vehicle.
9. Discard all of the used sealing washers. Cap all of the open connections.
INSTALLATION PROCEDURE
1. Install the evaporator tube to the condenser using new sealing washers.
