Silverado SS AWD V8-6.0L VIN N (2003)
5. Connect the fuel feed and return pipes at the fuel tank.
6. Install the EVAP canister.
7. If equipped with 4WD, install the fuel hose/pipe clip to the bracket on the transfer case.
8. Install the fuel hose/pipe clip to the bracket on the transmission.
9. Install the fuel pipe bracket to the bellhousing stud.
10. Install the fuel pipe bracket nut (2).
Tighten
Tighten the nuts to 10 N.m (89 lb in).
11. Lower the vehicle.
12. Remove the caps from the fuel rail and EVAP pipes.