Silverado SS AWD V8-6.0L VIN N (2003)
INSTALLATION PROCEDURE
1. Install the TAC module.
NOTE: Refer to Fastener Notice in Service Precautions See: Powertrain Management/Service Precautions/Vehicle Damage Warnings/Fastener Notice.
2. Install the TAC module nuts.
Tighten
Tighten the nuts to .................................9 N.m (80 lb in).
3. Connect the engine wiring harness electrical connector (1).
4. Install the red CPA retainer.
5. Connect the I/P harness electrical connector (2).