Silverado SS AWD V8-6.0L VIN N (2003)
Installation Procedure
1. Install the PCM.
Ensure that the mounting tabs are engaged.
2. Secure the spring latch to the PCM.
3. Connect the PCM electrical connectors.
NOTE: Refer to Fastener Notice in Service Precautions See: Powertrain Management/Service Precautions/Vehicle Damage Warnings/Fastener Notice.
4. Tighten the PCM electrical connector bolts (2).
Tighten
Tighten the bolts to ...............................8 N.m (71 lb in).
5. Install the PCM cover.
