Silverado SS AWD V8-6.0L VIN N (2003)
1. Align the block tooth on the upper shaft to the 12 o'clock position (1).
2. Install the wave washer (1) to the steering column upper shaft.
NOTE: Ensure all fasteners are securely seated before applying needed torque. Failure to do so may result in component damage or malfunctioning
of steering column.
3. A new SIR coil assembly will come pre-centered. However if centering is required, follow the instructions on the notice of the coil assembly.
Refer to Inflatable Restraint Steering Wheel Module Coil Centering in Steering Wheel and Column.
4. Align the SIR coil (2) with the horn tower on the turn signal cancel cam (1)
5. Install the pre-centered SIR coil (2) to the steering column upper shaft.
IMPORTANT: Do not remove the tab on the SIR coil until installation is complete.
