Silverado SS AWD V8-6.0L VIN N (2003)
1. Install the pitman arm to the power steering gear.
2. Install a new pitman arm washer and nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 250 N.m (184 lb ft).
3. Remove the power steering gear from the vise.
4. Install the power steering gear.
5. Lower the vehicle.
6. Check the wheel alignment. Refer to Measuring Wheel Alignment (With Rear Wheel Steering) Measuring Wheel Alignment (Without Rear Wheel
Steering) in Wheel Alignment.
