Silverado SS AWD V8-6.0L VIN N (2003)
Tighten
Tighten the upper control arm retaining nut to 50 N.m (37 lb ft).
6. Install the brake hose and the bracket retaining bolt to the steering knuckle
Tighten
Tighten the bolt to 9 N.m (80 lb in).
7. Connect the outer tie rod to the steering knuckle.
8. Install the wheel hub and bearing assembly.
9. Install the tire and wheel.
10. Load the torsion bars. Refer to Torsion Bar Replacement.
11. Align the vehicle. Refer to Measuring Wheel Alignment (With Rear Wheel Steering) Measuring Wheel Alignment (Without Rear Wheel Steering)
in Wheel Alignment.
12. Lower the vehicle.
