Silverado SS AWD V8-6.0L VIN N (2003)
11.4. Grasp the connector lock tabs (1, 2). Rotate the connector counterclockwise.
12. The connector is locked into place when you hear an audible snap and the tabs (1, 2) are aligned.
13. Dispose of the shock absorber. Refer to Shock Absorber Disposal.
Shock Absorber Disposal
SHOCK ABSORBER REPLACEMENT
CAUTION:
-
Gas charged shock absorbers contain high pressure gas. Do not remove the snap ring from inside the top of the tube. If the snap ring is
removed, the contents of the shock absorber will come out with extreme force which may result in personal injury.
-
To prevent personal injury, wear safety glasses when center punching and drilling the shock absorber. Use care not to puncture the shock
absorber tube with the centerpunch.
