Silverado SS AWD V8-6.0L VIN N (2003)
2. Install the wheel hub and bearing retaining bolts.
Tighten
Tighten the bolts to 180 N.m (132 lb ft).
3. Install the wheel drive shaft retaining nut.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the nut to 250 N.m (184 lb ft).
4. Install the retainer (3) and cotter pin (2) to the wheel drive shaft nut.
5. Install the dust cap (4).
6. Install the brake rotor.
7. Install the tire and wheel.
8. Lower the vehicle.