Silverado SS AWD V8-6.0L VIN N (2003)
1. Install the clutch pedal sub-assembly.
Notice: Refer to Fastener Notice in Service precautions.
2. Install the clutch pedal to brake module bolts.
^
Tighten the bolts to 50 Nm (37 ft. lbs.).
3. Install the clutch pedal to clutch pedal bracket bolt.
^
Tighten the bolt to 36 Nm (27 ft. lbs.).
4. Push the clutch master cylinder in until the pushrod socket is touching the clutch pedal
5. Push in and rotate the clutch master cylinder 45 degrees counterclockwise to the locked position.
