Silverado SS AWD V8-6.0L VIN N (2003)
Fluid - M/T: Service and Repair
ZF S6-650
Transmission Fluid Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle Lifting.
2. Remove the oil fill plug.
3. Place a suitable drain pan under the transmission in order to catch the drained transmission fluid.
4. Remove the oil drain plug.
5. Remove any old sealant from the transmission housing and plugs.
Installation Procedure
1. Apply sealant GM P/N 12346004 (Canadian P/N 10953480), or equivalent to the treads of the oil drain and fill plugs.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the oil drain plug.
^
Tighten the plug to 35 Nm (26 ft. lbs.).