Silverado SS AWD V8-6.0L VIN N (2003)
4. Install the shift lever bolts.
^
Tighten the bolts to (20 Nm (15 ft. lbs.).
5. Install the boots.
6. Install the control lever and boot.
Control Lever and/or Boot Replacement
Control Lever and/or Boot Replacement
Removal Procedure
Important: DO NOT move the shift lever assembly adjustment nut if replacing the control lever.
1. Remove the control lever.
2. Remove the control lever boot retainer plastic retainers, if necessary.
3. Remove the control lever boot retainer, if necessary.
