chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Hinged Body Side Window Replacement|Page 27199 > < Body - Vehicle Glass Distortion Information
Page 1
background image

Quarter Window Glass: Service and Repair
Hinged Body Side Window Replacement

The content of this article/image reflects the changes identified in
TSB  Bulletin No.: 06-08-48-001

Date: April 03, 2006

Subject:
Revised Hinged Body Side Window Replacement

Models:
1999-2006 Chevrolet Silverado
1999-2006 GMC Sierra

Hinged Body Side Window Replacement

Removal Procedure

1. Place tape from body side to window to hold in place.

2. Remove the side access door trim panel. 

3. Disconnect the window latch.

4. Remove the bolts from the hinges.

5. Remove the tape and window from the vehicle.

Installation Procedure

1. Position the window and tape into position.

Note:

Refer to Fastener Notice.

2. Install the bolts to the hinges.

Tighten the bolts to 10 N.m (89 lb in).

3. Install the window latch.

Hinged Body Side Window Replacement|Page 27199 > < Body - Vehicle Glass Distortion Information