Spectrum L4-91.5 1.5L (1985)
Steering Gear: Service and Repair
Manual Steering Gear Replace
1.
Remove intermediate shaft cover.
2.
Loosen upper pinch bolt, then remove lower pinch bolt from pinion shaft.
3.
Raise and support front of vehicle.
4.
Remove both front wheel and tire assemblies.
5.
Disconnect both tie rod ends from steering knuckles using tool No. J-21687-02 or equivalent.
6.
Remove steering gear-to-body mounting nuts.
7.
Remove band from left boot, then slide boot off steering gear.
8.
Straighten lock washer between inner tie rod and rack, then separate tie rod from rack.
9.
Reverse procedure to install.
