Sprint-Import L3-061 1000cc 1.0L Turbo VIN 2 FI (1987)
Fig. 14 Wide open throttle micro switch adjustment
Diagnostic Code 21, Wide Open Throttle Microswitch
1.
Remove air cleaner and carburetor.
2.
Connect ohmmeter to switch as shown in Fig. 12. Resistance between terminals should be infinite.
3.
Open throttle gradually until ohmmeter indicates zero ohm. Measure clearance between throttle butterfly and carburetor bore, Fig. 13. Clearance
should be .29 - .33 inch (7.2 - 8.4 mm). If clearance is out of range, adjust by bending lever, Fig. 14.