Sprint-Import L3-061 1000cc 1.0L Turbo VIN 2 FI (1987)
between terminals IDL and E2 is present, Fig. 20. At that position, torque sensor screw to 1.2 - 1.7 ft. lbs.
b. Ensure no continuity exists between IDL and E2 of throttle position sensor when a .031 inch thickness gauge is inserted between throttle stop
screw and throttle lever, Fig. 21.
c. Ensure continuity exists between terminals IDL and E2 of throttle position sensor when .016 inch thick gauge is inserted between throttle stop
screw and throttle lever.
d. If checks are not as specified, adjust angle of throttle position sensor until satisfactory results are obtained.
4.
Connect connector to throttle position sensor.
