Sprint L3-61 1.0L (1988)
Brake Shoe: Customer Interest
Brakes - Rubbing/Grinding Noise From Rear
Number:
88-347-5
Section:
5
Date:
SEPT., 1988
Subject:
RUBBING/GRINDING NOISE FROM REAR BRAKES
Model and Year:
1985-88 SPRINT
TO:
ALL CHEVROLET DEALERS
Some of the above vehicles may exhibit a grinding or rubbing noise from the rear brakes on application after an extended period of non-use,
approximately 8 hours or more. This condition may be aggravated by high humidity, condensation or rain during the park period.
A new lining material has been developed which eliminates the described noise condition. This lining material was introduced on late 1988 model year
vehicles beginning with the following VIN's: Model Year Code J.
VIN BREAKPOINT
3 Door
(VIN Body Code 2)
769929
"Metro" 3 Dr.
(VIN Carline Code MS)
769666
5 Door
(VIN Body Code 6)
769691
"Turbo"
(VIN Engine Code 2)
N/A
For vehicles built before these VIN breakpoints that exhibit the described condition, new style brake shoe assemblies should be installed in place of the
existing parts.
Following service manual procedures remove and replace four rear brake shoes using parts obtained in kit, P/N 96061639, shoe set, brake. This kit
provides parts for one wheel only, 2 kits will be required for each vehicle.
Parts are currently available from GMSPO.
Labor Operation Number:
H0257
Labor Time:
1.0 Hour
