Sprint L3-61 1.0L (1988)
Fig. 12 Aligning timing belt pulley punch mark with oil pump arrow
4.
Using 17 mm wrench, turn crankshaft clockwise and align punch mark on timing belt pulley with arrow mark on oil pump, Fig. 12.
Fig. 13 Timing belt installation
5.
With all 4 marks aligned, install timing belt on sprockets so that drive side of belt is free of any slack and so tensioner plate is positioned as shown
in Fig. 13.
6.
To ensure timing belt is free of slack, turn crankshaft one rotation clockwise after installing belt. After removing slack, first torque tensioner stud,