SSR V8-6.0L VIN H (2006)
Console: Removal and Replacement
Console Armrest Replacement - Front Floor
Console Armrest Replacement - Front Floor
Removal Procedure
1. Open the console armrest.
2. Remove the 2 lower armrest retaining screws.
3. Remove the armrest from the hinge.
Installation Procedure
1. Position the armrest to the hinge.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the 2 armrest screws ensuring the armrest is properly aligned to the console.
Tighten the screws to 2.5 N.m (22 lb in).
3. Close the console armrest.
Console Compartment Door Hinge Replacement