SSR V8-6.0L VIN H (2006)
5. Install the body rear compartment lid fasteners.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the body rear compartment lid fasteners to 2 N.m (18 lb in).
6. Latch the body rear compartment lid latches.
7. Remove the protective coverings from the vehicle.
8. Connect the battery.
9. Perform the window cycle learn procedure. Refer to Reinitialization of the Power Window in Doors.
IMPORTANT: The window cycle learn procedure must be performed or the folding top will not operate correctly.
10. Connect the Tech-2 and reset any diagnostic codes that may be present.
11. Cycle the folding top under power through one complete cycle in both directions.
12. Inspect the folding top for proper operation.
