SSR V8-6.0L VIN H (2006)
1. Install the hydraulic hose retainer clip.
2. Push on the lower end of the hydraulic cylinder on the lower ball stud on the stowage compartment lid hinge. Install the retaining clip.
3. Push on the upper end of the hydraulic cylinder on the upper ball stud on the stowage compartment lid hinge. Install the retaining clip.
4. Remove the protective covers from the quarter panels.
5. Bleed the hydraulic system of air by using the control button to cycle the folding top 5 times, while continuously inspecting for proper operation.
6. Inspect the hydraulic system for any oil leaks.
7. Inspect the fluid level and add fluid as needed. Refer to Power Folding Top - Adding Fluid () .
8. Cycle the stowage compartment lid closed.
9. Inspect the folding top for proper operation. Refer to Power Folding Top Description and Operation () .
