SSR V8-6.0L VIN H (2006)
Power Seat Switch: Removal and Replacement
Seat Switch Bezel Replacement
Seat Switch Bezel Replacement
Removal Procedure
1. Remove the seat from the vehicle. Refer to Seat Replacement (See: Service and Repair/Removal and Replacement/Seat Replacement) .
2. Remove the seat cushion outer trim panel from the seat assembly. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat
Cushion/Service and Repair/Removal and Replacement/Seat Cushion Outer Trim Panel Replacement) .
3. Remove the 3 screws that retain the switch bezel to the seat.
4. Remove the seat switch from the switch bezel by releasing the retaining tabs Refer to Seat Switch Replacement - Power (See: Seat Switch
Replacement - Power) .
5. Remove the heated seat switch from the switch bezel by releasing the retaining tabs. Refer to Heated Seat Switch Replacement - Front (See: Seat
Heater Switch/Service and Repair/Removal and Replacement) .
6. Remove the switch bezel from the seat .
Installation Procedure
1. Install the heated seat switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Heated Seat Switch Replacement - Front
(See: Seat Heater Switch/Service and Repair/Removal and Replacement) .
2. Install the seat switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Seat Switch Replacement - Power (See: Seat
Switch Replacement - Power) .
Notice: Refer to Fastener Notice in Cautions and Notices.