SSR V8-6.0L VIN H (2006)
7. Remove the seat belt buckle bolt (2).
8. Disconnect the black electrical connector from the seat belt buckle.
9. Pull the seat belt buckle harness back through the hole in the seat adjuster assembly.
10. Remove the seat belt buckle assembly by pulling it out through the slot in the seat cushion cover.
11. Remove the push pins (1) securing the seat cushion cover on each side of the seat cushion frame.
12. Release the front J-strip (1).
13. Disconnect the seat cushion heater electrical connector, if equipped.
14. Remove the seat cushion cover and pad from the seat cushion frame.