SSR V8-6.0L VIN H (2006)
11. Remove the guide pin seals from the brake caliper mounting bracket.
12. Inspect the brake rotor.
Installation Procedure
1. Install the guide pin seals on the mounting bracket.
2. If the guide pins and brake pad retaining clips are to be reused, use denatured alcohol to clean them.
3. Dry the brake guide pins and brake pad retaining clips with non-lubricated, filtered air.
4. Apply high temperature silicone brake lubricant to the brake caliper guide pins. DO NOT apply the lubricant to the brake pad retaining clips.
