SSR V8-6.0L VIN H (2006)
6. Using the J 38606, compress the valve spring.
7. Using a magnet or equivalent, remove the valve keys.
8. Remove the J 38606.
9. Remove the retainer (2), valve spring (3), valve seal, and shim (4).
Installation Procedure
1. Apply a small amount of clean grease to the tip of the valve.
2. Install the valve and shim (4).
3. Using the J 38606, compress the valve spring (3) and retainer (2).
4. Install the valve spring assembly.
5. Apply a small amount clean grease in the grooves for the valve keys.
6. Using a small magnet or equivalent, install the keys.