SSR V8-6.0L VIN H (2006)
6. Install the retaining nuts for the rear hangers. Finger tighten the retaining nuts.
7. Notice: Refer to Fastener Notice in Service Precautions.
Install the catalytic converter flange retaining nuts.
^
Tighten the catalytic converter retaining nuts to 45 Nm (33 ft. lbs.).
8. Install the rear exhaust hanger retaining nuts.
^
Tighten the rear exhaust hanger retaining nuts to 25 Nm (18 ft. lbs.).
9. Important: Make sure that all the reference markings are positioned correcting.
Install the rear coil spring.
10. Raise the rear axle to install the lower shock absorber bolt and nut.
11. Install the lower shock absorber bolt and nut.
^
Tighten the shock absorber bolt to 80 Nm (59 ft. lbs.).
