SSR V8-6.0L VIN H (2006)
Accelerator Pedal Position Sensor: Service and Repair
ACCELERATOR PEDAL WITH POSITION SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the left knee bolster panel.
2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
3. Remove the accelerator pedal mounting bolts (1).
4. Remove the APP assembly (2).
INSTALLATION PROCEDURE
1. Install the APP assembly (2).
2. Install the APP mounting bolts (1).
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the APP mounting bolts to 20 N.m (15 lb ft).